Baby Lock Celebrate Serger｜ Other Products

Finished another project? Time to celebrate! The easy-to-use Baby Lock Celebrate serger includes adjustable manual tensions, allowing for perfect stitches on any type of fabric. Jet-Air Threading™ threads your machine with the touch of a lever. Plus, Celebrate’s presser foot features a 6mm height that makes serging on thicker fabrics a breeze!
Jet-Air Threading - Celebrate's superior Jet-Air Threading system allows you to thread your machine with the touch of a lever. You don't have to worry about thread guides on this machine; you can spend more time serging than struggling to feed your thread through the loopers.
Vertical Needle Penetration - Unlike other machines that use slanted needles, the Celebrate Serger uses needles that are set vertically. Slanted needles tend to push and damage fabrics, while the Celebrate only moves up and down. This up and down movement protects your materials and helps to prevent needle deflection.
Fabric Support System - Celebrate's Fabric Support System keeps your stitches flat and stable, regardless of the speed, fabric, or stitches you choose. There are built-in stitch fingers that move in conjunctions with the knife, adjusting the seam concurrently with the cutting width. This operation, when combined with the Micromatic Twin Cam Tension System, gives you superior stitching capabilities.
Micromatic Twin Cam Tension System - Get perfectly flat stitches and eliminate thread tangles with the Micromatic Twin Cam Tension System. This system ensures that your thread glides smoothly through the tensions. When paired with the fabric support system, your stitches will lay smooth against your fabric regardless of the width of your stitches or type of material.
Advanced Knife Driving And One-Way Clutch System - With its extra-high presser foot and Advanced Knife Driving and One-Way Clutch System, your serger has a larger
Dial Adjustable Stitch Length & Automatic Rolled Hem - Easily adjust your stitch length with a flick of the wrist. The Celebrate has one dial that includes an automatic rolled hem setting that will retract the built-in stitch width finger for a rolled hem finish.
Adjustable Presser Foot - The Celebrate presser foot can be raised up to 6mm (3/18"). These few extra millimeters can make a huge difference when sewing thicker fabrics like denim or fleece.

Advanced Serging Features of the Baby Lock Celebrate Serger

Jet-Air Threading™
Micromatic Twin Cam Tension System
Full-Featured Differential Feed

2 to 1 Ratio - gathering
3 to 4 Ratio - stretching

4/3/2 Thread serging
Exclusive Fabric Support System
Vertical Needle Penetration
Pure lighting with 1 LED light
Rolled hemming with 2 or 3 threads
Flatlock stitching with 2 or 3 threads
Dial adjustable stitch width: 1.5 - 7.5mm
Dial adjustable stitch length: 0.75 - 4mm
Dial adjustable built-in rolled hem
Knife and needles closer for easier serging curves
Heavy-duty cutting system
Side thread cutter
1500 Stitches per minute
Presser foot pressure adjustment
Adjustable presser foot height up to 6mm
Built-in needle threading system
Electronic foot control
Enhanced telescopic antenna with thread guides
Snap on, multi-purpose presser foot
Built-in ribbon/tape guide
Built-in accessory storage
Carry handle

 
INCLUDED ACCESSORIES

Foot Control
Lint brush/needle insert tool
Two needle clamp screws
Package of assorted sized needles
Small screwdriver
Tweezers
Upper cutting blade for replacement
Looper threading tool
Screwdriver
Machine soft cover
Four spool caps
Four sponge disks
Four thread nets
Allen wrench
Four cone holders

Warranty

25 years limited
10 years parts
5 years computer circuit
5 years electrical
1 year labor
Brand:Baby LockSKU:BLS1Tags:Baby Lock, Sergers