Tamlyn Residential Safety Strap (RRS46) - Case of 12｜ Other Products

The Tamlyn Residential Safety Strap (RRS46) is a one-time-use fall protection anchoring device designed for residential framing and roofing applications.
It is used as part of a personal fall arrest system to provide a temporary but secure attachment point to structural framing members during construction.
This safety strap is intended for use by trained personnel only and must be installed in accordance with approved safety procedures. It is designed to help reduce fall risk during residential roof framing, sheathing, and related elevated construction activities.

Key Features & Design

One-time use residential safety strap
2" wide high-strength synthetic webbing
2-1/2" steel D-ring sewn to one end
Reinforced folded loop on opposite end
Quick wrap-and-tighten installation method
Designed for structural framing attachment
Lightweight and easy to deploy on jobsite
Component of a complete fall arrest system

Installation Overview
The strap is installed by looping the D-ring end through the web loop and securing it around a structural framing member. Once tightened, it creates a temporary anchorage point for fall protection systems.
Proper installation requires:

Attachment only to verified structural members
Installation under supervision of a competent person
Use of full fall protection system components
Pre-use inspection of strap and connection points

Important Safety Information

This is a single-use fall protection device

Must be used only as part of a complete fall arrest system
Not intended for reuse after load event or damage
Must be installed only on structurally sound framing members
Do not expose to temperatures above 200°F
Do not expose to welding sparks or corrosive environments
Must be inspected before each use
Improper use can result in serious injury or death

Applications
The Residential Safety Strap is commonly used in:

Residential roof framing
Roof sheathing installation
Elevated wood framing work
Residential construction sites
Temporary fall protection anchoring
Structural framing tie-off points

Technical Specifications (TDS Summary)

Product Code: RRS46
Strap Width: 2 inches
Material: High-strength synthetic webbing
End Fitting: 2-1/2" steel D-ring
Configuration: One-time-use anchoring strap
Installation Method: Wrap-and-loop structural attachment
Application Type: Residential fall protection anchorage
Load System: Designed as part of a full fall arrest system (not standalone rated capacity use)

Compliance & Standards

Must be used in accordance with OSHA fall protection requirements
Intended as a component in a complete personal fall arrest system
Installation must follow manufacturer guidelines and jobsite safety regulations
Must be inspected prior to each use for damage or wear

Safety Data Sheet (SDS) Summary
The Residential Safety Strap is considered a fabricated safety device made of synthetic webbing and metal components.
General Safety Classification

Not classified as a chemical hazard under normal use
Mechanical injury risk exists if improperly used or loaded

Handling Guidelines

Inspect before each use for cuts, fraying, or damage
Do not modify or alter strap components
Replace after single use or load event
Avoid exposure to heat sources above 200°F
Keep away from welding sparks and corrosive chemicals

First Aid Notes

If strap failure results in fall exposure, follow standard emergency response procedures
Treat any related injuries immediately with medical attention

Important Usage Disclaimer
The Residential Safety Strap is only one component of a complete fall protection system. It must be used with compatible harnesses, lanyards, and anchorage systems as part of a full OSHA-compliant fall arrest setup. Proper training and supervision are required for safe use.
Brand:TamlynSKU:RRS46Tags:Strap Anchors